General Information - Checchi & Magli SP onion-Serie Bedienungs- Und Wartungsanleitung

Aim of the manual
This instruction manual is produced by the manufactur-
er to provide all those who have dealings with the onion
lifter (which may also be referred to hereinafter as the
'work vehicle') with all the necessary information and cri-
teria to apply for its use.
Apart from adopting good use practices, operators
(in compliance with their job responsibilities) are also
required to read and understand the information con-
tained in this use manual and put it into practice exactly
as stated.
The original instructions are supplied by the manufac-
turer in English language.
To fulfil legal or commercial requirements, the original
instructions may be supplied by the manufacturer in
other languages.
This manual is an integral part of the work vehicle; it
must be kept for future reference, in an easily accessible
place known to all those concerned, for the entire work-
ing life of the work vehicle.
If the machine is sold, the seller is required to pass on the
manual to the new owner.
The illustrations may differ from the actual configuration
of the work unit however this does not affect in any way
the instructions provided.
For any doubts contact the manufacturer or authorised
service centres.
Manufacturer and machine identification details
The plate shown, which is applied directly to the work
vehicle, contains all the essential information for identi-
B
C
UN41-0001AF
Annexed documentation
As well as this handbook, the customer is provided with
the instructions for use and maintenance of any optional
units that may be fitted on the work vehicle.
English language

GENERAL INFORMATION

F
D E
To highlight certain parts of the manual's contents
deemed important for safety or information reasons the
following symbols have been used, whose meanings are
outlined below.
DANGER
This indicates information or procedures which, if
not strictly followed, cause death or serious personal
injury.
WARNING
This shows information or procedures which, if not
followed, may cause death or serious personal in-
jury.
CAUTION
This shows information or procedures which, if not
followed, may cause slight personal injury.
NOTICE
This shows information or procedures which are im-
portant to follow in order to prevent malfunctions or
physical damage.
fying the machine and the manufacturer.
A) Manufacturer's identification details
B) Work vehicle type
C) Work vehicle model
D) Work vehicle gross weight
E) Serial number
F) Year of manufacture
- EC Declaration of conformity for the work vehicle.
1
1
Use and maintenance