General Information - Checchi & Magli UNITRIUM Bedienungs- Und Wartungsanleitung

Aim of the manual
This instruction manual is produced by the manufactur-
er to provide all those who have dealings with the work
vehicle stated on the cover with all the necessary infor-
mation and criteria to apply for its use.
Apart from adopting good use practices, operators
(in compliance with their job responsibilities) are also
required to read and understand the information con-
tained in this use manual and put it into practice exactly
as stated.
The original instructions are supplied by the manufac-
turer in English language.
To fulfil legal or commercial requirements, the original
instructions may be supplied by the manufacturer in
other languages.
This manual is an integral part of the work vehicle; it
must be kept for future reference, in an easily accessible
place known to all those concerned, for the entire work-
ing life of the work vehicle.
If the work vehicle is sold on, the seller is required to pass
on the manual to the new owner.
The illustrations may differ from the actual configuration
of the work unit however this does not affect in any way
the instructions provided.
For any doubts contact the manufacturer or authorised
service centres.
Manufacturer and machine identification details
The plate shown, which is applied directly to the work
vehicle, contains all the essential information for identi-
B
C
UN41-0001AF
Annexed documentation
Along with this handbook, the Customer is given the
documentation specified.
The instructions for use and maintenance of any optional
units that may be provided with the work vehicle which
Assistance request procedure
All requests for technical assistance must be made to the
manufacturer's Technical Assistance Service or the au-
thorised service centres.
English language

GENERAL INFORMATION

F
D E
To highlight certain parts of the manual's contents
deemed important for safety or information reasons the
following symbols have been used, whose meanings are
outlined below.
DANGER
This indicates information or procedures which, if
not strictly followed, cause death or serious personal
injury.
WARNING
This shows information or procedures which, if not
followed, may cause death or serious personal in-
jury.
CAUTION
This shows information or procedures which, if not
followed, may cause slight personal injury.
NOTICE
This highlights useful and important information
and procedures.
fying the machine and the manufacturer.
A - Manufacturer's identification details
B - Work vehicle type
C - Work vehicle model
D - Work vehicle gross weight
E - Serial number
F - Year of manufacture
are not considered in this manual.
- "EC" Declaration of conformity for the work vehicle.
Whenever making requests for technical assistance con-
cerning the work vehicle, remember to quote the data
shown on the data plate and the fault encountered.
1
1
Use and maintenance