Field Of Application - HBM TEDS Montageanleitung

2

FIELD OF APPLICATION

The TEDS (Transducer Electronic Data Sheet) module contains an electronic data sheet
(all key transducer characteristics and a unique identification number) which can be used
to set up a measuring amplifier automatically. An appropriately equipped measuring am­
plifier can read-in the transducer characteristics and convert them into its own settings
in order to display the physically measured value correctly scaled. You can also integrate
a TEDS module into the transducer plug later if the transducer does not have a built-in
TEDS module.
Wiring with a zero-wire TEDS (patented module) enables you to use the existing wires to
transfer TEDS data, provided the amplifier supports this TEDS variant. This switches be­
tween a DAQ mode (line transmits the analog measurement signal) and a data mode (line
transmits the digital TEDS data). This allows you to use the same cables as for transduc­
®
ers without TEDS. Otherwise, use a 1-Wire TEDS module.
Data mode
DAQ mode
TEDS-enabled measuring amplifier
Transducer with TEDS module
Fig. 2.1 The TEDS concept
TEDS
4
FIELD OF APPLICATION