HBM TEDS Montageanleitung Seite 20

- the transducer type,
- the measured quantity,
- the electrical output signal,
- the required bridge excitation voltage,
- the characteristic curve, etc.
The standard stipulates templates for many transducer types. HBM has developed its
own templates for other transducer types, such as inductive transducers according to
the differential choke system, based on the form stipulated by the standard.
S
Area 4
You can optionally use additional templates – in part defined by the standard, in part
by HBM – to store further information in the transducer, such as a compensating
polynomial from a calibration.
As an aid to the nomenclature used by the templates, section 6 sets out the key tem­
plates complete with explanatory notes.
18
CONTENT OF THE TEDS MODULE
TEDS