CFT
2
Application instructions
Piezoelectric force transducers of the CFT type series are suitable for
measuring compressive forces. Because they provide highly accurate
dynamic and quasi‐static force measurements, they must be handled very
carefully. Particular care must be taken when transporting and installing the
devices. Dropping or knocking the transducers may cause permanent
damage.
The transducers are extremely rigid and have a high natural frequency.
The specifications list the permissible limits for mechanical, thermal and
electrical stress. It is essential that these are taken into account when
planning the measuring set‐up, during installation and ultimately, during
operation.
A2529-2.0 en/de/fr
9
HBM