HBM TEDS Montageanleitung Seite 27

Parameter
Calibration Period
(Days)
Measurement
Location ID
1)
As an example, the values show an HBM displacement transducer of type WA, measuring range 50
mm.
HBM template: Frequency/Pulse Sensor
Along with the physical and electrical unit, this template defines the display resolution to
be used: 24 bits, 16 bits or 8 bits (SINGLE Precision). You also have to choose, for exam­
ple, between the variants "Frequency" or "Counter". For example, a sensor that emits
pulses during one revolution can be defined either as an angle of rotation sensor (count­
ing pulses) or as a speed sensor (measuring frequency).
Parameter
Transducer Electrical
Signal Type
Minimum Velocity
Maximum Velocity
Pulse Measurement
Type
TEDS
TEDS TEMPLATES
1)
Value Unit
730 days
0
1)
Value Unit
Pulse
Sensor
0.000 rpm
E+000
1.000 rpm
E+004
Frequen­
cy
Requires Explanation
rights at
level
CAL Time before recalibration
USR Identification number for the
measuring point. Can be
assigned according to the
application.
Possible values: a number
from 0 to 2047. If this is not
enough, you can also use
the HBM Channel Comment
template.
Requires Explanation
rights at
level
ID This entry can no longer be
changed after the template
has been created.
CAL The difference between
these values is the maxi­
mum rotational speed
CAL
according to the data sheet.
CAL This entry can no longer be
changed after the template
has been created.
25