Safety Measures During Operation; Safety Devices; Emergency Stop Button; Protective Cover Of Draw Bar - Optimum OPTIdrill DH 40G Betriebsanleitung

1.8

Safety measures during operation

CAUTION!
Danger due to inhaling dust and mist that are hazardous to health.
Depending on the materials to be machined and the agents used, dusts and mists can
arise that are detrimental to health.
Ensure that the harmful dust and mist generated are safely sucked off at the point of
origin and routed away from the working area or filtered. To do so, use a suitable
extraction unit.
CAUTION!
Risk of fire and explosion by using flammable materials or cooling lubricants.
Extra precautionary measures must be taken before machining flammable materials (e.g.
aluminium, magnesium) or using combustible agents (e.g. spirit) to avert a health
hazard.
Extra precautionary measures must be taken before machining flammable materials (e.g.
aluminium, magnesium) or using combustible agents (e.g. spirit) to avert a health haz-
ard.
1.9

Safety devices

Use the geared drill only with properly functioning safety devices.
Stop the geared drill immediately, if a safety device fails or is faulty or becomes ineffective.
It is your responsibility!
If a safety device has been activated or has failed, the geared drill must only be used if you
the cause of the fault has been eliminated,

you have verified that there is no danger to personnel or objects.

WARNING!
If you bypass, remove or deactivate a safety device in any other way, you are
endangering yourself and other personnel working with the geared drill. The possible
consequences are

injuries due to components or workpieces flying off at high speed,

contact with rotating parts and

fatal electrocution.
WARNING!
Although the isolating safety devices provided and delivered with the machine are
designed to reduce the risks of workpieces being ejected or parts of tools or work-
pieces breaking off, they cannot eliminate these risks completely.
The geared drill includes the following safety devices:
an emergency stop push button,

a protective cover on the drill head,

a drilling table with T-slots to fix the workpiece or a vice,

an adjustable drill chuck protection with position switch.

1.9.1

Emergency stop button

1.9.2

Protective cover of draw bar

The drill head is equipped with a protective cover.
Safety
Version 1.0.1 - 2020-11-24 Translation of original instructions
DH40G | DH40GP EN
55