Emergency-Stop Push Button; Drilling Table; Separating Protective Devices; Protective Cover Of The V-Belts - Optimum Optidrill B 24H Betriebsanleitung

1.10

Emergency-stop push button

ATTENTION!
The drilling spindle keeps
turning for a short time
even after actuating the
emergency stop push but-
ton depending on the pre-
set speed.
1.11

Drilling table

Seats for T-slots are atta-
ched to the clamping table.
WARNING!
Risk of injury due
workpieces flying off at
high speed. Securely fix the
workpiece on the drilling
table.
1.12

Separating protective devices

1.12.1 Protective cover of the V-belts

A protective cover for the belt
pulleys is mounted on the dril-
ling head. There is a switch
integrated in the
cover which monitors that the
cover is closed.
INFORMATION
The machine cannot be star-
ted, if the protective cover is not
closed.
GB
B24H | B24HV | B28H | B28HV
86
Emergency-
stop push
button
Abb.1-2:
seats for slot nuts
to
Abb.1-3:
Protective
cover
protective
Abb.1-4:
Translation of the original instructions
Emergency stop B24H - B24HV, B28H - B28HV
Drilling table
Protective cover
Safety
Version 2.2.6 - 2020-07-21