Inhaltsverzeichnis
Werbung
1.11
Emergency stop button
ATTENTION!
The drilling spindle keeps turning for a short time even after actuating the emergency
stop push button depending on the preset speed.
1.12
Drill chuck guard
Adjust the guard to the correct height before you start working.
To do so, slacken the clamping screw, set the required height and re-tighten the clamping
screw.
There is a switch integrated in the spindle protection mounting which monitors the closed posi-
tion.
INFORMATION
The machine cannot be started, if the drill chuck guard is not closed.
1.13
Protective cover of V-belt.
INFORMATION
The machine cannot be started, if the protective cover is not closed.
Safety
Version 1.0.3 - 2020-07-14
Translation of original instruction
D17 Pro│D23 Pro│D26 Pro│D33 Pro
EN
69
Werbung
Inhaltsverzeichnis
