Liability Claims For Defects / Warranty - Optimum Opti mill MB 4P Betriebsanleitung

Chapter
4
4
4.2.1
parts
2.6 ; 2.13 ; 3 ; 3.6
parts ; 3.3.3
7.4

Liability claims for defects / warranty

Beside the legal liability claims for defects of the customer towards the seller, the manufacturer
of the product, OPTIMUM GmbH, Robert-Pfleger-Straße 26, D-96103 Hallstadt, does not grant
any further warranties unless they are listed below or were promised in the framework of a sin-
gle contractual provision.
The processing of the liability claims or of the warranty is performed as chosen by OPTIMUM
GmbH either directly or through one of its dealers.
Any defective products or components of such products will either be repaired or replaced by
components which are free from defects. Ownership of replaced products or components is
transferred to OPTIMUM Maschinen Germany GmbH.
The automatically generated original proof of purchase which shows the date of purchase, the
type of machine and the serial number, if applicable, is the precondition in order to assert liabil-
ity or warranty claims. If the original proof of purchase is not presented, we are not able to per-
form any services.
Defects resulting from the following circumstances are excluded from liability and warranty
claims:
Using the product beyond the technical options and proper use, in particular due to over-

straining of the machine.
Any defects arising by one's own fault due to faulty operations or if the operating manual is

disregarded.
Inattentive or incorrect handling and use of improper equipment

Unauthorized modifications and repairs

Insufficient installation and safeguarding of the machine

Disregarding the installation requirements and conditions of use

Atmospheric discharges, overvoltage and lightning strokes as well as chemical influences

The following items are also not subject to liability or warranty claims:
Wearing parts and components which are subject to a standard wear as intended such as

e.g. V-belts, ball bearings, illuminants, filters, sealings, etc.
Non reproducible software errors

Any services, which OPTIMUM GmbH or one of its agents performs in order to fulfil any addi-
tional warranty are neither an acceptance of the defects nor an acceptance of its obligation to
compensate. Such services do neither delay nor interrupt the warranty period.
Place of jurisdiction for legal disputes between businessmen is Bamberg.
If one of the aforementioned agreements is totally or partially inoperative and/or invalid, a provi-
sion closest to the intent of the warrantor is considered agreed upon, which remains within the
framework of the limits of liability and warranty which are specified by this contract.
Version 1.1.8 - 2021-7-29
Short summary
DRO3 removed from manual
Updated picture MB4P
Attention! Using height adjustment
Wiring diagram MP4PV 400V
Dimensions ; Installation plan ; Interdepartmental
transport ; Electrical connection MB4PV
Pos. 72 , Machine substructure plate
Translation of original instructions
new version number
1.1.3
1.1.4
1.1.5
1.1.6
1.1.7
1.1.8
MB4P ǀ MB4PV EN
115