Delivery Content; Intended Use - Sygonix Touch S Bedienungsanleitung

3. Delivery content

• Code lock
• Fasteners (2x special screws, 2x dowels, screwdriver bit for two special screws)
• Sticker with doorbell symbol
• 3x transponder cards
• Operating instructions
Up-to-date operating instructions
1
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.

4. Intended use

This product is designed to prevent unauthorised access to doors (e.g. in an office) and to
activate/disable alarm systems. The product enables to save up to 600 users with different
transponders/user codes.
The product is intended for vertical installation on a wall and is suitable for indoor and outdoor
use (IP65). A 12–24 V/DC power supply can be used.
Thanks to its particularly flat design, the product can also be installed in many difficult installation
locations, as only the connection cable requires a hole and the housing requires no cut-out.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit, fire or electric shock. Read the operating instruc-
tions carefully and store them in a safe place. Only make this product available to third parties
together with its operating instructions.
This product complies with statutory, national and European regulations. All company and prod-
uct names contained herein are trademarks of their respective owners. All rights reserved.
44