Replacing Oven Burner Air Bushing - Angelo Po 2N1FAGF Bedienungshandbuch

Remove the rack (C).
3)
Undo the screws and remove the guard (D).
4)
Unscrew the nozzle (E) and replace it with the
5)
one suitable for the type of gas in use (see
table at back of manual).
Replace the panel (D) and the rack (C) on com-
6)
pletion of the operation.
To carry out this operation, proceed as follows.
Turn off the gas supply tap.
1)
Remove the bottom plates (A) and the grid(B)
2)
from the oven.
Remove the rack (C).
3)
Undo the screws and remove the guard (D).
4)
3301360_inst_GB_rev.1

REPLACING OVEN BURNER AIR BUSHING

C
E
A
C
- 19 -
D
B
D
ENGLISH
GB