Angelo Po 2N1FAGF Bedienungshandbuch Seite 36

Faults
The pilot light goes out.
The fl ame is yellow.
Burner control knob is stiff .
The heating elements do not
come on
The burner does not light or
goes out suddenly.
GB
3301360_ut_GB_rev.1
Causes
The thermocouple has not
warmed up enough.
Burner dirty.
Gas control valve malfun-
ction.
Electrical connection not
made correctly
Switch faulty
Safety thermostat tripped
(Oven).
Thermocouple malfunction.
Safety thermostat
malfunction (Oven).
- 16 -
Remedies
Make more attempts to light the
fl ame.
Clean the burner.
Important
Contact the after-sales service.
Check the connection of the
electrical wires.
Important
Contact the after-sales service.
Replace the switch.
Important
Contact the after-sales service.
Reset the safety thermostat (see
page 10), if the problem persists,
call the after-sales service.
Important
Contact the after-sales service.
Important
Contact the after-sales service.
ENGLISH