Conversion Of Gas Supply - Angelo Po 2N1FAGF Bedienungshandbuch

Caution - Warning
Before doing any work, cut off the mains
electricity supply.
The manufacturer has tested the appliance
with its own mains gas, identifi ed by the sticker
applied to the nameplate.
If the type of gas to be connected is diff erent
from that used for testing, proceed as follows.
Turn off the gas supply tap (A).
1)
Change the top burner nozzles (see pages
2)
17-18).
Change the oven burner nozzle (see page
3)
18).
Change the top burner pilot light nozzles
4)
(see page 20).
Change the oven burner pilot light nozzle
5)
(see page 20).
If necessary, change the oven burner bush-
6)
ing (see page 19).
Adjust the minimum setting on the gas con-
7)
trol valves of the hob burners (see page 14)
and the oven burner (see page14).
Remove the sticker from the nameplate and
8)
apply the new one to identify the gas being
used.
Important
On completion of the operation, make sure
that there are no gas leaks or malfunctions.
3301360_inst_GB_rev.1

CONVERSION OF GAS SUPPLY

- 11 -
A
GB
ENGLISH