Replacing Parts - Angelo Po 0G0FA0 Bedien- Und Installationshandbuch

INSTRUCTIONS AND WARNINGS FOR REPLACING PARTS
Important
Before carrying out any replacement proce-
dure, activate all the safety devices provi-
ded and decide whether staff at work and
those in the vicinity should be informed.
In particular, turn off the gas supply tap and
prevent access to all devices which might
cause unexpected health and safety hazar-
ds if turned on. If work parts have to be re-
placed, use original spare parts only.
REPLACING THE TOP BURNER NOZZLE
To carry out this operation, proceed as fol-
lows.
1 - Turn off the gas supply tap.
2 - Remove the grid (A).
3 - Extract the burner (B).
IT
GB
DE
FR
ES
English

REPLACING PARTS

A
B
- 18 -
The manufacturer declines all responsibly
for injury or damage to components due to
the use of non original parts, or extraordi-
nary work on the appliance which may mo-
dify the safety requirements without the
manufacturer's authorisation.
When ordering components, follow the in-
structions provided in the parts catalogue.
4 - Unscrew the nozzle (C) and replace it with the
one suitable for the type of gas in use (see table
at back of manual).
5 - Replace the burner and the grid.
9
8
C
IDM-39608800900.tif