External Temperature Controller (Hei-Plate Core Only); Switching The Device On/Off - Heidolph Hei-PLATE Mix 20 l Betriebsanleitung

Commissioning

External temperature controller (Hei-PLATE Core only)

➜ The port used to connect the external temperature controller EKT-HEI CON is
located under the protective cover on the rear of the device (see figure above).
➜
Lift the protective cover for connecting temperature controller cable by hand. No
tools are required to open the protective cover.

Switching the device on/off

➜
To turn on the device, press the on/off button. When the device is switched on, the
on/off button lights up green.
➜ To turn off the device, press the on/off button again. When the device is turned off,
the on/off button lights up white.
37