Start Up
Switch unit on and off
Switch unit on
➜ Press the On/Off switch at the lower
side.
✓ The green control light switches on.
✓ The unit is switched on.
Switch unit off
➜ Press the On/Off switch at the upper
side.
✓ The green control light switches off.
✓ The unit is switched off.
Install vessels on shaker plate
Use optional attachment to secure vessels on shaker plate. Attachments with clamping
rollers for a variety of flasks, beakers, and test tubes are available. Microtiter plates nest
on the shaker plate, no optional holders are required.
In special cases, and at low shaking speed, e.g. Petridishes may be placed on the
anti-skid rubber plate that comes with your item as a standard option.
➜ Before starting shaking, ensure vessels and the like are properly secured on the
shaker plate.
TITRAMAX 100 / TITRAMAX 101 / TITRAMAX 1000
Microtiter plates are loaded in indentations
in the rubber mat, shipped with your
shaker as a standard option. They are
positively locked in these indentations, the
rubber mat itself can be replaced at ease.
Switch On/Off: device switched on
Switch On/Off: device switched off
12