Herunterladen Diese Seite drucken

Ducati Performance 96680611A Montageanleitung Seite 107

Spezifische diebstahlsicherung

Werbung

Montagem dos componentes
(versões Supersport)
Importante
Verifique, antes da montagem, se todos os componentes estão
limpos e em perfeito estado.
Adote todas as precauções necessárias para evitar danificar
qualquer peça com a qual deve trabalhar.
Montagem da unidade eletrónica do dispositivo antirroubo
Calce a unidade eletrónica do dispositivo antirroubo (2) dentro do
suporte antivibrações (1).
Introduza a unidade eletrónica do dispositivo antirroubo (2), com
o suporte antivibrações (1), dentro do subchassis traseiro (Q) e
bloqueie-a com o elástico original (N1), como mostrado na figura
(J).
Distenda a extensão da cablagem do dispositivo antirroubo (4),
seguindo o percurso da cablagem principal (P).
Ligue a tomada (4A) da extensão da cablagem do dispositivo
antirroubo (4) à ficha (P1) da cablagem principal (P).
Utilizando 3 braçadeiras de serrilha grandes (5) fixe a extensão da
cablagem do dispositivo antirroubo (4) à cablagem principal (P),
como mostrado na figura (Y) e (K).
Ligue a ficha (4B) à unidade eletrónica do dispositivo antirroubo (2),
como mostrado na figura (W).
ISTR 854 / 00
Kit installation (Supersport versions)
Caution
Check that all components are clean and in perfect condition
before installation.
Adopt any precaution necessary to avoid damages to any part of
the motorcycle you are working on.
Anti-theft system control unit assembly
Fit anti-theft system control unit (2) inside the vibration damping
support (1).
Insert the anti-theft system control unit (2) with vibration damping
support (1) inside rear subframe (Q) and block it using the original
elastic (N1), as shown in figure (J).
Lay down the anti-theft system wiring extension (4) following the
main wiring path (P).
Connect socket (4A) of the anti-theft system wiring extension (4) to
pin (P1) of the main wiring (P).
Using no.3 big self-locking ties (5), secure anti-theft system wiring
extension (4) to main wiring (P), as shown in figures (Y) and (K).
Connect pin (4B) to anti-theft system control unit (2), as shown in
figure (W).
19

Werbung

loading

Diese Anleitung auch für:

Performance 96680612a