Maintenance And Replacement Of; Environmental Protection Tips - Flyer FIT E-Bike System Originalbetriebsanleitung

Allow your FLYER specialist retailer to instruct
you .
Monthly – FLYER rider
Check the firm attachment of all screws, nuts and
quick-release fasteners
Every year or after every 1000 km, whichever
occurs first
FLYER specialist retailer
• Lubrication of all moving parts for
which lubrication is intended
(excluding brake surfaces)
• Visual inspection of the frame and of
components for cracks and damage
• Mend paint damage
• Replace parts with rust spots
• Treat all bare metal parts (excluding brake
surfaces) against corrosion (rust)
• Change defective or damaged parts
• Check the wheels and centre them as
required
• Check the tension of the spokes
• Check and clean the
chain/sprocket/cogset
• Lubricate the chain with a suitable lubricant
• Check the rim for wear
• Check the brake pads for wear
• Check that all screws, nuts, quick-release
axles and quick-release fasteners are firmly
attached
• Check the brake system and quick-release
axles and adjust them or replace parts if nec-
essary
• Check the gear system and adjust or replace
parts of it if necessary
• Check the hubs
• Check the headset
• Check the pedals
Only use cleaning agents and lubricants
that are recommended or approved by
the component manufacturer .
Please note that not all lubricants and
care products are suitable for your
FLYER . By using unsuitable lubricants
or care products, you can damage or im-
pact the functionality of your FLYER
e-bike .
Ensure that the brake pads, brake discs
and brake surfaces on the rims are not
exposed to cleaning or servicing fluids or
oils, as this reduces the performance of
the brakes .
24.1 Maintenance and
replacement of wearing parts
Components to be changed may only be
replaced with identical, original parts .
Wearing parts too may only be replaced
with identical, original components .
Using any parts other than the original
ones will cause the manufacturer's liabil-
ity for material defects and/or the manu-
facturer's warranty service to become
void . There is also an increased risk of
accidents or falls .
The safe functioning of your FLYER e-bike can
only be guaranteed with regular maintenance .
Maintenance work may only be performed by
FLYER specialist retailers .
25. Environmental
protection tips
Please take the environment into account when
caring for, cleaning or disposing of your FLYER
e-bike . Use biologically degradable cleaning
agents for maintenance and cleaning where pos-
sible and ensure that cleaning agents are not
washed into the drain .
The complete vehicle, all components, lubrication
and cleaning agents and particularly the battery
(hazardous goods) must be disposed of in an ap-
propriate way .
The following symbol appears on the type plate of
the FLYER e-bike and on the battery:
If electronic components are no longer usable,
please return them to your FLYER specialist re-
tailer .
77
The symbol depicting a
wheeled rubbish bin with a
line through it means that
the motor and battery must
not be disposed of with
household waste when
they reach the end of their
service life .
EN