Inspection Plan - Flyer FIT E-Bike System Originalbetriebsanleitung

that the battery has been operated and charged in
accordance with the operating instructions)
*At the time of printing, it is not yet possible to
conclude the FLYER Premium warranty due to
technical reasons . Interested customers may
sign up on the website www.flyer-bikes.com/en/
warranty/premium-warranty by 31 December 2020
for registration at a later date . The Premium war-
ranty shall apply from the date of purchase irre-
spective of the date of registration .
b. Processing and exclusion of claims under
the warranty
During the warranty period, FLYER AG shall cover
the costs of repair or replacement resulting from
the product defects specified above, provided that
such work is carried out by a FLYER dealer recog-
nised by FLYER AG after the FLYER e-bike has
been clearly identified (sales receipt, completed
e-bike pass, or registration if applicable) . FLYER
AG reserves the right to supply or use functionally
equivalent goods in the event of the exchange of
a FLYER e-bike or of components under warranty .
Claims made under this warranty do not extend
the original period . The same warranty limitations
apply as the warranty limitations listed under Point
1 . The warranty shall not apply in cases of normal
wear and tear, wearing parts, or misuse . Further
information on the warranty conditions and on war-
ranty exclusion are available from the FLYER deal-
er or on www.flyer-bikes.com/en/warranty.

24. Inspection plan

After the first 200 ridden kilometres or after 4
months:
FLYER specialist retailer
• Check the firm attachment of all screws, nuts
and quick-release fasteners
• Check the wheels and centre them as
required
• Check the tyres
• Check the fastening torque on all parts
• Adjust the headset
• Check the brake lines and shifter cables
• Check the gear system and adjust if neces-
sary
• Check the brakes and adjust if necessary
• Sufficient lubrication of all components
• Check the suspension elements and adjust if
necessary
•
FLYER rider
During your e-bike's first inspection by the FLYER
specialist retailer, ask them to explain the correct
processes for cleaning and oiling the chain after
rain and checking components for function or
damage .
Before each ride – FLYER rider
• Check the correct position of the bell
• Check the function of the brakes
• Check the function of the gear system
• Are all quick-release fasteners, quick-release
axles, screws and nuts completely closed and
fastened?
• Check that the tyre pressure is correct
• Check the wheels for true running and dam-
age as well as safe attachment and correct
fastening
• Check that the handlebars, stem, seat post
and seat are safely attached and correctly
positioned
• Check the battery's charge status
• Check that the battery is correctly and secure-
ly attached .
After each ride – FLYER rider
• Cleaning the FLYER e-bike
• Visual inspection of the frame and of
components for cracks and damage
• Check the tyres for damage, wear, brittleness,
foreign objects and sufficient profile depth
• Check the rims for wear and
true running
• Check the tension of the spokes
• Clean the chain and sprockets as required
and lubricate them with a suitable chain oil
approved by the manufacturerIf necessary,
clean the brake discs with a
suitable brake cleaner approved by the
manufacturer
• Clean all bearings as required and lubricate
them with suitable lubricant approved by the
manufacturer
• Clean suspension elements as required and
lubricate them with original lubricant approved
by the suspension element manufacturer
• Clean all moving parts for which lubrication is
intended (especially quick-release fasteners,
quick-release axles and joints) as required
and lubricate them with a suitable lubricant ap-
proved by the manufacturer
Allow your FLYER specialist retailer to instruct
you .
What to do after riding in rain, snow or wet con-
ditions:
(in addition to the points under "After each ride")
FLYER rider
• Clean the chain and lubricate it with a suitable
lubricant approved by the manufacturer
• Clean the brake
• Clean the gear system
• Check that all components are sufficiently lu-
bricated
76