Flyer FIT E-Bike System Originalbetriebsanleitung Seite 270

Important
After this step, leave the komoot app open and
switch to the FLYER display .
8 . Open the settings menu on the e-bike display .
9 . Select the sub-menu "Connections" .
10 . Open the sub-menu "Navigation" .
11 . Select "Pair with komoot" to establish a
connection .
The komoot app must remain open on your
smartphone and the connection activated in order
for this to work .
The display now indicates that it is searching for
devices .
If no devices are found, you can start a new se-
arch by selecting "Pair with komoot" again .
The detected devices are now displayed .
19
EN