Safety Instructions For All Electrical Systems - Flyer FIT E-Bike System Originalbetriebsanleitung

could also be live . Maintenance work may only
be performed by your FLYER specialist retail-
er . Improper work may lead to electrical shocks
and injuries .
• Take care not to damage or crush cables while
maintaining, cleaning, transporting or adjusting
your FLYER .
• If it is no longer possible to use the bike safely,
you may no longer use your FLYER . This is the
case when live parts or the battery are dam-
aged or when you detect cracks in the frame
or in components . The FLYER must be left un-
used and secured until it has been checked by
a FLYER specialist retailer .
• You should be particularly careful if children
have access to the bike . Prevent children from
inserting objects into openings in the bike .
They could suffer a life-threatening electric
shock .
• To store your FLYER in an assembly stand, it
should be attached by the seat post . High-qual-
ity aluminium frames may be damaged by the
clamping force of the holder .
4. Safety instructions
for all electrical
systems
Read all the safety instructions and regula-
tions.
Non-compliance with the safety instructions and
regulations may lead to electric shock, fire and/
or severe injuries .
Keep all safety instructions and regulations for
future use .
The term "battery" in these operating instructions
refers to all standard batteries .
Your FLYER is supplied with the corresponding
operating manual for the integrated motor from
the component manufacturer . You are strongly
advised to carefully read the attached instruction
manual on the electric drive system before you
use your bike for the first time. You should also
pay close attention to the safety guidelines .
Information concerning the FLYER e-bike's oper-
ation, maintenance, care and technical data can
be found in this manual and online on the respec-
tive websites for the manufacturers' components .
Remove the battery from the e-bike be-
fore you begin working on the it (i .e . in-
stallation, maintenance, working on the
chain) . The same applies when storing
the bike or transporting it on a car, train
or plane . There is a risk of injury if the
electrical system is unintentionally acti-
vated .
The electric drive system built into your
FLYER e-bike is extremely powerful.
Correct and safe operation requires you
to have your FLYER regularly main-
tained by a specialist retailer .
Immediately remove the battery when
you notice damage to the electrical sys-
tem, particularly when live parts are ex-
posed after an accident . Always contact
your FLYER specialist retailer when you
require repairs, want to ask a question,
have a problem or discover a defect . A
lack of technical knowledge can lead to
severe accidents, injuries or damage .
The FLYER was designed for driving
with the motor . Never drive without a
battery or with the system switched off,
as no light will be available without the
battery or system .
6