Auto Mode Menu; Elevation Calibration Menu; Enviolo Tr Automatiq Integrated - Flyer FIT E-Bike System Originalbetriebsanleitung

5.5.15 Auto mode menu

In the auto mode menu, you can change the po-
sition of the auto mode when selecting the as-
sistance levels .
Sequence when "Position 1" is selected:
High
Std
Eco
Auto
Off
Sequence when "Position 2" is selected:
High
Auto
Std
Eco
Off

5.5.16 Elevation calibration menu

You can correct the actual elevation in the eleva-
tion calibration menu . Move the joystick up and
down to change the numbers . Move the joystick
left and right to switch between numbers .
Press the joystick to apply the new settings after
confirmation.

5.5.17 enviolo TR automatiQ integrated

If your FLYER e-bike has an "enviolo TR automa-
tiQ integrated" gear hub, the hub may need to be
recalibrated .This is the case if you suspect that
you are not getting the full transmission range .
In the settings menu, select the "Calibrate envio-
lo" submenu by clicking the OK button .
Now press the OK button again to start the ca-
libration .
The system can only calibrate successfully if you
pedal lightly or with no force throughout the pro-
cess. A confirmation message will appear on the
display if the calibration has been successful .
enviolo TR automatiQ integrated
14