Error Display; Message Display - Flyer FIT E-Bike System Originalbetriebsanleitung

Now launch your desired route on your smartpho-
ne .
A confirmation message appears once the e-bike
is connected to the komoot app .
The e-bike is now in navigation mode .
1 . Navigation direction
2 . Current road
3 . Road ahead
4. Distance to next navigation point
More information on the komoot app:
http://support .komoot .de/
https://www .komoot .de/about/routeplanner
4.
1.
2.
3.
5.5.25 Error display
The parts of the e-bike system are monitored at
all times during use and charging . If an error is de-
tected, an error code will be displayed on the con-
sole . To switch the console back to the standard
display, press the joystick button to acknowledge
the error . If the fault cannot be acknowledged,
troubleshoot it according to the fault table (section
5 .7 fault table) or contact your FLYER dealer . De-
pending on the error code, the assistance is auto-
matically stopped as necessary . You can continue
to use the bicycle normally without the drive even
if the assistance function is no longer being pro-
vided by the motor. You can find information on
the individual error codes in the error table .
The error code gives a precise description of the
error .
5.5.26 Message display
At the top left in red: Error message (error was
displayed and acknowledged . Rectify the error
and restart the system)
At the top left in white: Service message (service
recommendation from your specialist retailer)
At the top right in white: Motor overheated (Mes-
sage "Motor overheated" was displayed . The
motor power is reduced as a protective measure .
You can continue to ride normally .)
25
EN