Error Display; Message Display; Settings Menu; Menu Structure - Flyer FIT E-Bike System Originalbetriebsanleitung

5.8 Error display
Press the "Mode" button to acknowledge the error
display . Once you have acknowledged it, the dis-
play disappears .
The error code gives a precise description of the
error .
5.9 Message display
Current messages are shown on the main menu
of the display for information purposes .
2.
1.
1 . USB charging active
2 . Motor overheated ("Motor overheated" warning
was displayed and acknowledged . The motor
power is reduced as a protective measure . Let
the drive unit cool down and restart the system)
3 . Service message (service recommendation
from your specialist retailer)
4 . Error message (error was displayed and ack-
nowledged . Rectify the error and restart the
system)
4.
3.

5.10 Settings menu

Access the settings menu by holding down the
"Mode" button for at least 3 seconds . You can only
open the settings menu while stationary .

5.11 Menu structure

i . Reset
i . Trip Reset
ii . Factory Reset
ii . Basic settings
i . Language
ii . Time
iii . Units
iii . My FLYER
i . Assistance
ii . Light
iii . Automatic light
iv . Service
v . Wheel circumference
vi . Auto-Mode
iv . About

5.12 Menu navigation

Use the + and - assistance level buttons to navi-
gate the menu and configure the values. Press
the "Mode" button to access sub-menus or con-
firm an action. Press the light button to leave the
current menu .
28