Seat Tube Battery Stb - Flyer FIT E-Bike System Originalbetriebsanleitung

lower holder
Prevent extreme overheating due to ex-
ternal effects or overloading.
Only use the battery with your FLYER .
• Never use a damaged battery . If you
discover cracks, deformation of the
housing or leaks, stop using the bat-
tery and have your FLYER checked
by a specialist retailer . Damaged bat-
teries must not be posted .
5.28 seat tube battery STB
1 LED charge status display
Shows the battery's remaining charge . If an error
occurs, an error code is displayed (see Chapter
Akkuladestandsanzeige Akkuladestandsanzeige
5 .29 Battery error codes)
Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität . Jede leuchtende Akkuladestandsleuchte steht für ca . 20 % der Akkukapazität .
5 an 5 an
Akkuladestandsleuchten Akkuladestandsleuchten
5 an 5 an
Anteil der Akkukapazität Anteil der Akkukapazität
im Vergleich zum voll im Vergleich zum voll 81 % bis 100 % 81 % bis 100 %
geladenen Akku geladenen Akku 2 Control button for battery charge level
* * 1 1 Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell . Wenn keine Restkapazität mehr im Akku vorhanden ist, blinkt eine Akkuladestandsleuchte schnell . Let the LED battery charge level indicator blink to
verify the remaining battery power .
3 Charger port
4 Rubber cap
Protects the connectors for the charger when the
battery is not being charged .
To check if the battery is charging, press the con-
trol button to be shown the battery charge level .
Charge the battery when none of the LEDs light
up . Only use the original charger . Never use char-
gers supplied by third-party companies .
Charging status indicator
The charging status of the battery is indicated by
five LEDs.
A fast-flashing LED indicates that the battery has
been completely discharged .
Removing the battery
1) Switch off the electrical system first. Press
the on/off button for this purpose.
2)
Unlock the battery with the battery key and
remove it from the holder. Hold the battery firmly,
as it is heavy .
37
• The lighting function will still continue
for approx. one hour after the battery
is empty .
1
2
4 an 4 an 3 an 3 an 2 an 2 an
3
4 an 4 an 3 an 3 an 2 an 2 an
4
61% bis 80% 61% bis 80% 41% bis 60% 41% bis 60% 21% bis 40% 21% bis 40%
Check whether the battery is fully char-
ged after you have purchased it and be-
fore using it for the first time.
1 an 1 an 1 blinkt* 1 blinkt*
1 1
EN
1 an 1 an 1 blinkt* 1 blinkt*
1 1
11% bis 20% 11% bis 20% 1% bis 10% 1% bis 10%