Light Menu; Automatic Light Menu; Service Menu - Flyer FIT E-Bike System Originalbetriebsanleitung

Press the "Mode" button to save the setting .

5.18 Light menu

In the light menu, you can adjust the display back-
lighting in the range from 10 to 100% .
Press the "Mode" button to save the selected
backlighting and leave the lights menu . Press
"Cancel" to leave the menu without saving the
light settings .

5.19 Automatic light menu

In the automatic light menu, you can switch the
automatic backlighting on or off.
The check mark indicates which option is current-
ly applied. Press the "Mode" button to confirm the
selected setting .

5.20 Service Menu

The service menu shows you when your FLYER
specialist dealer next recommends that your bike
be serviced . If the interval between services as
recommended by your specialist retailer has been
exceeded, a message indicating that a service is
due appears when the system starts up .
If the interval between services as recommended
by your specialist retailer has been exceeded, a
message indicating that a service is due appears
when the system starts up .
31
EN