Inhaltsverzeichnis
Werbung
Maintenance and care
■
Screw in the spark plug again tightly
and push on the spark plug connector.
4. Put the transport protection onto the blade.
5. Store the machine in a cool, dry place.
Proper maintenance and care is necessary to
ensure the functionality and safety of the
appliance. Note the following points:
■
Only carry out maintenance and care work if
you have the necessary knowledge and tools.
■
Wait until the engine has cooled down
completely.
■
Only replace any worn or defective appliance
parts with original spare parts from the
manufacturer.
■
Do not carry out any maintenance and care
work that is not described in these instructions
for use. Instruct an authorise service
workshop to do this work. Any infringements
will invalidate the manufacturer's warranty.
The intervals for the maintenance and care work
mentioned here can be found in the maintenance
schedule (see chapter 10.8 "Maintenance
schedule", page 55).
Use only the approved cutting tools (see chapter
2.8 "Approved cutting tools", page 39)!
10.1 Cleaning the guard plate Clean the guard
plate and cutter head with cutting tool to remove
residues of grass and dirt after every use. Grass
residues will result in overloading and damage of
the engine, the drive shaft and the gearbox in the
cutter head.
1. Switch off the engine.
2500126_a
maintenance, care and
cleaning work.
10 MAINTENANCE AND CARE
2. Remove residues of grass and dirt using a
stick or screwdriver and brush.
10.2 Cleaning/replacing the air filter (13)
IMPORTANT!
Danger of engine damage
Operation of the engine
without air filter will result in
serious engine damage!
■
Never operate the
appliance without air filter.
■
Clean the air filter at
regular intervals.
■
Replace a damaged air
filter.
1. Dismantling the air filter:
■
Loosen the air filter screw (13/1) until the
air filter housing (13/2) is loose.
■
Pull off the air filter housing.
■
Pull the filter sponge (13/3) from the frame
(13/4).
Maintenance and care
73
Werbung
Inhaltsverzeichnis
