Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 92

Hold the clutch center with the special tool and loosen the
clutch lock nut. Remove the tools and the lock nut.
If you will remove the oil pump driven sprocket, loosen the
driven sprocket mounting bolt at this time.
TOOLS:
Clutch center holder
Lock nut wrench, 17 x 27 mm
NOTE
07923-KE10000 or
07HGB-001000A
(U.S.A. only)
07716 - 0020300 Equiva-
lent commercially available
in U.S.A.
CLUTCH/GEARSHIFT LINKAGE
Remove the following:
- washer
- clutch center, judder spring and spring seat
- discs and plates
- pressure plate
Remove the thrust washer and clutch outer.
Remove the oil pump driven sprocket mounting bolt, driven
sprocket and oil pump drive chain.
7-5