Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 166

FRONT WHEEL/SUSPENSION/STEERING
Drive the bushing into place with the seal driver.
Place the slider bushing over the fork tube and rest it on the
slider.
Coat a new oil seal with ATF or equivalent and install it with
the seal markings facing up. Drive the seal in with the seal driv-
er.
07947-KA50100
07947-KF00100
TOOLS:
Fork seal driver
- driver attachment
Install the stop ring securely into the groove in the fork slider.
CAUTION
• Do not scratch the fork tube sliding surface.
Install the new dust seal onto the fork slider.
Compress the fork tube and pour in the recommended fork oil
to the specified level.
RECOMMENDED FORK OIL: ATF or EQUIVALENT
SPECIFIED LEVEL: '88: 133 mm (5.2 in)
After '88: 128 mm (5.0 in)
CAPACITY: '88: 497 cc (16.8 US
OZ,
17.4 Imp oz)
After '88: 502 cc (16.9 US
OZ,
17.6 Imp ozl
;
.
Gently install the fork spring in the fork tube then install the
spring seat and spacer.
NOTE
Note the spring direction; the tapered end must face toward
the bottom.
Loosely install the fork tube cap with a new O-ring.
CAUTION
• Do not damage the fork tube sliding surface.
11IFORKSP~
I 1
I
I
~
!
12-17