Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 29

OIL PUMP/RELIEF VALVE
REMOVAL
Separate the crankcase (Section 11).
Remove the bolt and pressure relief valve cover.
Remove the pressure relief valve from the oil pump.
LUBRICATION
(3) PRESSURE RELIEF VALVE
DISASSEMBLY
Remove the snap ring and disassemble the relief valve.
TOOL:
Snap ring pliers 07914-3230001
(1) SNAP RING
INSPECTION
Check the spring, O-ring and valve for fatigue, wear or dam-
age.
Check the body for clogging or damage.
Clean all the parts and assemble them in the reverse order of
disassembly.
Replace the relief valve, if necessary, as an assembly.
OIL PUMP REMOVALIDISASSEMBLY
Remove the oil pump by removing two mounting bolts.
Remove the dowel pins and a-rings.
(1) a-RING
~
(2) BODY
o
(3) VALVE
~
(5) SNAP RING
(1) BOLTS
2-5