Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 95

CLUTCH/GEARSHIFT LINKAGE
Check the oil pump drive sprocket for damage.
Measure 1.0 of the drive sprocket and the 0.0. and 1.0. of the
outer guide.
SERVICE LIMITS:
Oil pump drive sprocket 1.0. 32.10 mm (1.264 in)
Clutch outer guide 0.0. 31.92 mm (1.257 in)
1.0. 22.09 mm (0.870 in)
Measure the mainshaft 0.0. at the clutch outer guide.
SERVICE LIMIT: 21.92 mm (0.863 in)
GEARSHIFT LINKAGE
REMOVAL
Remove the following:
- drive sprocket cover (page 8-2)
- gearshift pedal arm from the gearshift spindle
- right crankcase cover (page 7-3)
- clutch assembly (page 7-4)
- oil pump drive chain (page 7-5)
Loosen the two oil pipe stay mounting bolts and remove the oil
pipe mounting bolt.
Pull the oil pipe out of the stay and oil pump.
7-8
. I
(2) CLUTCH OUTER GUIDE
__ (1) OIL PUMP DRIVE
SPROCKET