Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 78

COOLING SYSTEM
DISASSEMBLY
Disconnect the cooling fan motor wire connector from the
thermostatic switch and remove the wire from the clamp.
Remove the ground wire terminal bolt.
Remove the cooling fan motor mounting bolts and cooling fan
motor.
RADIATOR INSPECTION
NOTE
• See section 18 for thermostatic switch inspection.
Inspect the radiator soldered joints and seams for leaks.
Slow dirt out from between core fins with compressed air. If
insects, etc., are clogging the radiator, wash them off with
low pressure water.
Carefully straighten any bent fins.
(2) MOUNTING SOLTS
(3) GROUND TERMINAL/SOLT
(1) COOLING FAN MOTOR
(3) PIVOT SOLT
(1) RADIATOR
01'(4)
LOWER MOUNT SOLTS
5-6