Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 106

CYLINDER HEAD COVER REMOVAL
Remove the following parts:
- seat
- fuel tank (page 4-3)
- air cleaner case (page 4-4)
- thermostat bolts
- radiator mounting bolts, and swing the radiator forward
NOTE
If you will be servicing the inner cylinder head cover compo-
nents, remove the carburetors (page 4-4) at this time.
FRONT:
Disconnect the spark plug caps.
Remove the cylinder head cover bolts and cover.
NOTE
If the cylinder head cover is difficult to remove:
Remove the radiator mounting bolts and release the radiator
from the frame grommets. Suspend the radiator with a
piece of rope or something suitable. (refer to 9-8 page).
REAR:
Disconnect the spark plug caps.
Remove the cylinder head cover bolts and cover.
CAMSHAFT REMOVAL
Remove the cylinder head covers and carburetors (page 4-4).
Remove the timing hole cap and crankshaft hole cap from the
left crankcase cover.
Align the FT mark (rear: RT mark) on the flywheel with the
index mark on the left crankcase cover timing hole by turning
the crankshaft counterclockwise.
CYLINDER HEADIVALVES
(1)
SPARK PLUG CAPS'
'6
~J_
(2) CYLINDER HEAD COVER
9-3