Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 152

HANDLEBARS
REMOVAL
Disconnect the front brake light switch wires from the switch.
Remove the following:
- rear view mirror from the master cylinder
- master cylinder holder mounting bolts and holder
- right handlebar switch screws and switch
- the right handlebar retainer ring and loosen the handlebar
pinch bolt.
- the right handlebar from the fork tube.
(6) PINCH BOLT
Disconnect the clutch switch wires from the switch terminals.
Remove the following:
- rear view mirror from the clutch lever holder.
- clutch lever holder mounting bolts and holder.
- left handlebar switch screws and switch.
Disconnect the choke cable and remove the left handlebar
switch from the choke lever.
Remove the left handlebar retainer ring and loosen the left
handlebar pinch bolt.
Remove the left handlebar from the fork tube.
FRONT WHEEL/SUSPENSION/STEERING
(2) HANDLEBAR SWITCH
(4) THROTTLE CABLES
(5) HOLDER
(1) RETAINER
RING
12-3