Honda 88-91 NT650 HAWK GT Serviceanleitung Seite 146

CRANKSHAFT{TRANSMISSION
(1) COUNTERSHAFT
~~©
o~®o
C2
r - - - - - ' - : : . . - - - - - - - - - - - l
Countershaft
Apply molybdenum disulfide grease to the following.
- shift fork grooves
- inside and outside of the bushings
- outside of the spline bushings
Install the shift forks onto the shaft as follows.
Left side: "MN8L" mark facing R. crankcase.
Center: "C" mark facing L. crankcase.
Right side: "MM9R" mark facing R. crankcase.
Tighten the bolt with the lock washer and bend up the tabs of
the lock washer.
Assemble the mainshaft, countershaft, shift fork shaft and
shift drum.
Install them into the left crankcase as an assembly.
(1) TRANSMISSION ASSEMBLY
\
11-15