Eaton xChargeIn M Serie Konfigurationshandbuch Seite 88

Maintenance
6.2.1 Software update via web interface
Fig. 6-9: Web interface software update
To perform a software update via the web interface, proceed as follows:
1) Download the current software for the charging station (
2) Log into the web interface of the charging station.
3) In the main menu under "System" select the item "Software Update".
4) Upload the current software using the "Choose a file ..." button.
5) Start the update process with the "Upload & Install" button.
6.2.2 Software update via USB stick
For a software update via USB stick, this feature must be activated in the
configuration (web interface).
To perform a software update via a USB stick, proceed as follows:
1) Download the current software for the charging station (
2) Plug the USB stick into a PC.
3) Format the USB stick with FAT32.
4) Create a new directory on the USB stick with the name "
5) Copy the downloaded
6) Connect the USB stick to the USB interface of the charging station. The
6.2.3 Software update via OCPP backend
The software update for the entire charging network can be performed via
the OCPP backend.
To perform the software update an FTP link is required. The information
downloaded from our website along with the software update contains the
FTP link.
For details on using the FTP link, see the OCPP backend manual.
88
update starts automatically.
file into the "
*.keb UPD
xChargeIn M Series
file).
*.keb
file).
*.keb
".
UPD
" directory.
Configuration manual V1.04
© EATON