Eaton xChargeIn M Serie Konfigurationshandbuch Seite 60

System overview
2.1.3 WLAN Access Point (Hotspot) (optional)
xChargeIn M Series can be connected to a mobile device via the integrated
WLAN access point. With the mobile device, the web interface can be easily
accessed and the configuration of the charging station can be performed.
The access data and the IP address of the WLAN access point are listed on
the configuration label. The configuration label is in a pouch which is en-
closed with the mounting material.
The following steps are necessary to perform the configuration via a mobile
device:
1) Connect a mobile device to the WLAN access point.
2) Access the IP address of the WLAN access point in a web browser on
3) Perform configuration via the web interface, see
2.1.4 Mobile communications (optional)
Certain device variants have a mobile communications interface. xChargeIn
M Series with mobile communications can connect to an OCPP backend
over the cellular network. The mobile communications provider may charge
additional fees (depending on the tariff) for running data transmissions.
60
1 ... xChargeIn M Series
the mobile device.
1 ... xChargeIn M Series
xChargeIn M Series
4 Web interface.
2 ... OCPP backend
Configuration manual V1.04
© EATON