User Menu - Eaton xChargeIn M Serie Konfigurationshandbuch

xChargeIn M Series
Proxy
All the necessary configurations for using a proxy server can be found in this
part.
OCPP
All the necessary configurations for connecting to an OCPP backend can be
found in this part. The displayed configuration options vary depending on the
selected transmission type (SOAP or JSON).
External TCP Meter
Here you can set whether the charging station can read out the measured
values from external meters for dynamically adjusting the charging current.
All the necessary configurations for the external meter can be found in this
part. This menu is only available if the charging station is operated as a sin-
gle charging station (not available on charging network).
Display Text
Settings for the text can be made here, which is shown on the display and
describes various operations of the charging station. The language of the
text can be changed, the display duration can be set and the displayed text
itself can be changed.
The display text is limited to 20 characters, no special characters or umlauts
can be used.
4.2

User menu

The user menu contains important information and settings for the user. It is
divided into the following areas:
●
●
●
●
User settings
In this area, changes to the following user settings can be made:
Username and Password
The web interface username and the corresponding password can be
changed here. The following rules apply for assigning the password:
●
●
Configuration manual V1.04
© EATON
Help
Licenses
User settings
Logout
At least 10 characters long
Maximum of 2 successive identical characters
Web interface
75