Purpose Of The Document; Requirements; Guarantee - Eaton xChargeIn M Serie Konfigurationshandbuch

Introduction
1.2

Purpose of the document

This document describes the configuration of the advanced features of
xChargeIn M Series after it has been installed. This includes, among other
things, the description of the settings in the web interface.
This document is an extension to the supplied manuals of xChargeIn M Se-
ries.
You must comply with all instructions and safety instructions in the
supplied manuals!
1.3

Requirements

This document contains information for persons with the following require-
ments:
Electrician
1.4

Guarantee

Only the maintenance work expressly permitted by Eaton may be performed.
Any other manipulations to the device will also result in loss of warranty.
WARNING!
Danger due to electric shock and fire hazard!
After opening the front part, product safety can no longer be guaranteed.
Only the covers described in the instructions may be opened. If one of the
covers is sealed by a lead seal, it is not permitted to be opened by unautho-
rized persons. If the lead seal is broken, the device loses its specific suitabil-
ity and may no longer be put into operation due to the resulting incorrect
marking.
54
Target group
Person who, due to his or her special training, expertise and experi-
ence as well as knowledge of current standards, is able to assess
the work performed and the possible hazards.
Knowledge of:
●
●
●
●
●
●
●
●
Required knowledge and abilities
current valid safety information,
the mode of operation of the charging station,
the displays and operating elements of the charging station,
basics of network technology,
basics of IT,
diagnostic options,
systematic fault analysis and rectification,
the setting options on the charging station.
xChargeIn M Series
Configuration manual V1.04
© EATON