Eaton xChargeIn M Serie Konfigurationshandbuch Seite 66

Configuration
Required steps
The following steps are required in order to transfer the configuration of one
xChargeIn M Series to additional xChargeIn M Series:
●
●
●
●
3.4.1 Create configuration
If this has not yet been done, a first xChargeIn M Series must be configured
with the desired settings. These settings serve as the basis for the configura-
tion of additional xChargeIn M Series.
The easiest way to configure the charging station is via the web interface.
On the graphical user interface the available settings and selection fields are
provided with short explanations.
Information
Not all settings available in the web interface can be transferred via USB
stick to additional charging stations.
3.4.2 Read out configuration
In order to be able to transfer the configuration of one xChargeIn M Series to
additional xChargeIn M Series, the USB stick must be connected to the USB
interface (in the connection panel) of the operationally ready and already
configured charging station. The charging station automatically transfers the
configuration to the USB stick and displays the process on the display.
When finished, the charging station indicates that the USB stick can be re-
moved by displaying "remove usb".
Information
Do not remove the USB stick during the writing process! Otherwise it can-
not be used for another configuration.
3.4.3 Adapt configuration file
To adapt the configuration file, the USB stick must be connected to a com-
puter. The configuration file was saved on the USB stick in the directory
as
the file name and parts of the content must be adapted.
66
Create configuration
Read out configuration
Adapt configuration file
Import configuration
file. In order to use the file to configure other charging stations,
*.conf
xChargeIn M Series
CFG
Configuration manual V1.04
© EATON