Notes On This Document - Eaton xChargeIn M Serie Konfigurationshandbuch

xChargeIn M Series
Fig. 1-1: Screws on front part
The front part
will break the warranty seal and void the warranty. For a warranty claim,
there is a duty of proof of the customer that the defect – which led to the de-
fect of the device – already existed at the time of delivery. If the warranty
seal is broken, this proof can no longer be provided, whereby the warranty
claim expires.
A device with broken warranty seals or removed lead seals may no longer
be put into operation. The necessary steps for replacement of the charging
station by the specialist dealer or service partner must be initiated.
1.5

Notes on this document

The manual is part of the product. It is to be retained over the entire life cycle
of the product and should be forwarded to any subsequent owners or users
of the product.
The instructions contained in this manual must be followed precisely. Failure
to do so could result in the creation of potential sources of danger or the dis-
abling of safety devices. Apart from the safety instructions given in this man-
ual, the safety precautions and accident prevention measures appropriate to
the situation in question must also be observed.
1.5.1 Contents of the document
●
1.5.2 Not contained in this document
●
●
●
Configuration manual V1.04
© EATON
1 may not be opened. Opening the front part (4 Torx screws)
Configuration of the advanced features of xChargeIn M Series
Commissioning and deinstallation of the charging station
Operating behavior of the charging station
Operation of the charging station
Introduction
55