Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
xChargeIn M Series
2
System overview
With xChargeIn M Series, several charging stations can be interconnected in
the form of a master/slave network. This makes charging with an intelligent
load management possible. In addition, a connection to a higher-level OCPP
backend can take place. The charging station is equipped with different net-
work interfaces for these functions.
Fig. 2-2: Example network setup
Only xChargeIn M Series can be operated as master charging stations; only
xChargeIn S Series can be operated as slave charging stations.
The following chapters describe which network interfaces xChargeIn M Se-
ries (master charging station) provides and how to set up a master/slave net-
work.
2.1
Network interfaces
xChargeIn M Series provides the following network interfaces (e.g. for con-
nection to an OCPP backend, ...):
●
●
●
●
Slave charging stations can only be connected via LAN to xChargeIn M Se-
ries (master charging station).
Configuration manual V1.04
© EATON
1
... Local charging network
3
... Master charging station (M Series)
5
... Higher-level network/Internet
LAN
WLAN (optional)
WLAN access point (optional)
Mobile communications (optional)
System overview
2
... Router/Switch
4
... Slave charging station (S Series)
6
... OCPP backend
57
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
