Ports For Communication In The Charging Network - Eaton xChargeIn M Serie Konfigurationshandbuch

xChargeIn M Series
Using a router
In a network connection using a router, the router automatically provides the
functionality of a DHCP server in most cases.
Information
If the IP addresses are assigned externally (for example, by routers with ac-
tivated DHCP server), the IP addresses must not be in the following range:
192.168.25.xxx
Using a switch
For a network connection using a switch, the master charging station must
be configured as a DHCP server. The IP addresses are then assigned by
the master charging station.
2.2.4

Ports for communication in the charging network

For the correct communication in the charging network, the ports below must
be enabled network-internally.
Information
If necessary, contact your network administrator to enable the ports.
Configuration manual V1.04
© EATON
Port Protocol
49153 TCP
15118 TCP
15118 UDP
68 TCP
68 UDP
67 TCP
67 UDP
Definition
Within the network
Within the network
Within the network
Within the network
Within the network
Within the network
Within the network
System overview
Description
Socket of the charging station
Link connection between the charg-
ing stations (SDP)
Link connection between the charg-
ing stations (SDP)
Transfer of the software update
(Bootps)
Transfer of the software update
(Bootps)
Transfer of the software update
(Bootps)
Transfer of the software update
(Bootps)
63