Enjoying Sound With Specific Speakers; Enjoying 6.1/5.1Ch Sources With All Speakers Including A Virtual Speaker (Matrix 6.1) - Yamaha DVR-S150 Bedienungsanleitung

Enjoying Sound with Specific Speakers

You can enjoy movies or music with various sound effects produced by the specified speakers.
Enjoying 6.1/5.1ch sources with all
speakers including a virtual
speaker (Matrix 6.1)
You can use Matrix 6.1 to produce virtual surround back
sound from your left and right surround speakers, creating
a realistic sense of surround back sound (sound that travels
from directly in front of the listening position to directly in
back of it). When you play a 6.1ch source such as a Dolby
Digital Surround EX or DTS-ES disc, you can enjoy
Dolby Digital plus Matrix 6.1 or DTS plus Matrix 6.1
sounds without adjusting any settings. Also, you can enjoy
5.1 channel sources with Matrix 6.1.
STANDBY/ON
POWER
AUDIO ANGLE SUBTITLE
SURROUND SELECT MATRIX 6.1
REPEAT
NIGHT
SW CENTER
SET MENU
SHIFT
TV INPUT
TV CH
A B C D E
SLEEP
PRESET PRESET
PTY SEEK
FREQ/RDS MODE
ON SCREEN
START
YPAO
CH
ENTER
STATUS
ON/OFF TEST
TV VOL VOLUME
MUTE
AMP
DVD/CD
VCR VIDEO
TUNER
MOVIE MUSIC SPORTS
CINEMA
TV
MATRIX 6.1
STEREO
A-B
SURR
START
MENU
CH
RETURN
AMP
GAME
1
Press AMP.
2
Press MATRIX 6.1 to select the mode.
Each time you press the button, the mode changes as
follows:
↓
AUTO
↓
Matrix 6.1
↓
OFF
• AUTO
When playing back a 6.1 channel source (Dolby
Digital Surround EX or DTS-ES), the sound is
automatically switched either to Dolby Digital plus
Matrix 6.1 or DTS plus Matrix 6.1 audio. If you
play a 5.1 channel source with this mode, a virtual
surround back speaker is not created.
• Matrix 6.1
Select this mode to play a 5.1 channel source with
Matrix 6.1. Sound outputs from a virtual surround
back speaker.
• OFF
The Matrix 6.1 decoder is not enabled. Even if you
play a Dolby Digital Surround EX or DTS-ES disc,
no sound outputs from the virtual surround back
speaker.
y
When the Matrix 6.1 decoder is working, "MATRIX" lights up in
the CinemaStation display and "6.1" appears beside the DSP
program name (e.g. "Action 6.1").
Notes
• Some Dolby Digital Surround EX or DTS-ES discs do not
contain a signal (flag) that CinemaStation cannot recognize
automatically. To play this type of disc with 6.1ch sound, press
MATRIX 6.1 to select "Matrix 6.1".
• Turning on the CinemaStation automatically sets the parameter
to "AUTO".
• In the following cases, 6.1ch sound playback is not available.
– "SUR." is set to "NON" in the Set Menu (page 77).
– Stereo playback is selected (no sound field effect) (page 63).
– Headphones are connected to the
on the CinemaStation.
– A Dolby Digital KARAOKE source is being played.
– The DSP program is set to "5ch Stereo" (page 26).
– Dolby Digital or DTS is set to "SUR. STANDARD"
(page 62).
SILENT CINEMA jack
57