Herunterladen Inhalt Inhalt Diese Seite drucken

Presetting Radio Stations; Presetting Fm Stations Automatically (Auto Preset) - Yamaha DVR-S150 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 190
You can preset your favorite radio stations automatically (FM stations only) or manually to tune the stations simply by
selecting the preset group and number. The CinemaStation can store up to 40 stations (5 groups x 8 stations) in its memory.
Presetting FM stations
automatically (Auto Preset)
If the FM radio wave reception is strong in your area, Auto
Preset is a quick and useful way to preset FM radio stations. If
you want to preset AM stations or the FM radio wave reception
is weak in your area, preset stations manually (page 52).
A/B/C/D/E
MEMORY
Display
d PRESET/TUNING u
1
Press PRESET/BAND on the CinemaStation
to select FM (Preset mode).
Each time you press the button, the mode changes as
follows:
"FM" (Tuning mode)
"AM" (Tuning mode)
"FM:" (Preset mode)
2
Press AUTO/MAN'L to select Auto Preset mode.
Make sure "AUTO" lights up in the CinemaStation
display.
PROG
REP A-B ALL
3
Press and hold MEMORY for about three seconds.
"MEMORY" and "AUTO" blinks in the CinemaStation
display, then Auto Preset starts at the frequency currently
selected toward higher frequency in a few seconds.
When Auto Preset finishes, "MEMORY" and
"AUTO" turns off and the CinemaStation
automatically applies a preset group and number to
each detected FM station.

Presetting Radio Stations

PRESET/BAND
AUTO/MAN'L
SLEEP
Lights up
AUTO ST
MEMORY
TUNED
To specify a starting group and number
You can specify a preset group and number that store the
first detected FM station. Also, you can start Auto Preset
at the frequency currently selected toward higher or lower
frequency.
1
Carry out steps 1 and 2 in the "Presetting FM
stations automatically (Auto Preset)"
procedure on this page.
2
Press and hold MEMORY for about three
seconds.
The MEMORY indicator blinks in the display.
3
While MEMORY is blinking, press A/B/C/D/E
to select the starting preset group, then
press PRESET/TUNING u or d to select the
preset start number.
4
Press PRESET/BAND to turn off the colon (:),
then press PRESET/TUNING u or d.
FM
C1
Disappears
When you press PRESET/TUNING d, Auto Preset
starts at the frequency currently displayed and tunes
toward the lower frequencies, and when you press
PRESET/TUNING u, Auto Preset tunes toward the
higher frequencies.
y
• When presetting a radio station, the CinemaStation
automatically sets the reception mode (stereo or monaural) at
the same time.
• Auto Preset automatically stops after searching the whole
frequency range or detecting 40 stations.
• If you select a preset number that has been already applied to
other station, it will be replaced with the new station.
• If the MEMORY indicator stops blinking before you perform
step 3 above, Auto Preset is cancelled and you must start the
procedure again.
76.0
51

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis