Connecting External Av Components; Connecting A Tv To An Audio Input - Yamaha DVR-S150 Bedienungsanleitung

CONNECTING EXTERNAL AV COMPONENTS

If you connect external AV equipment such as a VCR, video camera, or game console to the following AV jacks on the
CinemaStation, you can enjoy those AV sources with the CinemaStation. Also, you can record AV sources played on the
CinemaStation using the recording equipment. This section provides some examples of other AV equipment connections.
For information on your AV equipment, refer to the manual for it.
About the AUDIO jacks
• You cannot use both IN and OUT jacks for a same
category simultaneously. For example, the signal input
from the VCR IN jack does not output from the VCR
OUT jack.
• CinemaStation's digital and analog signal circuits are
independent of each other. Analog input signals can
only output from analog output jacks and digital input
signals can only output from digital output jacks.
About the DIGITAL AUDIO jacks
• The digital jacks are compatible with PCM, Dolby
Digital and DTS signals.
• The digital jacks are designed based on EIA standards.
To make a digital connection, use an optical cable that
meets EIA standards.
• The OPTICAL IN jack is compatible with a digital
signal that has a 96 kHz or less sampling frequency.
• You can use "Input Assign" in the Set Menu
(page 78) to assign VIDEO or VCR to the OPTICAL
IN jack. The default setting is "VIDEO".
14
Connecting External AV Components
SUBWOOFER MONITOR
OUT
OUT
VCR (DVD ONLY)
OUT
AM
VCR
ANT
IN
GND
VIDEO
IN
FM
ANT
R L
SYSTEM
CONNECTOR
COMPONENT
AUDIO
75 UNBAL VIDEO
AUDIO jacks
DIGITAL
S VIDEO VIDEO
AUDIO
Y
MONITOR VCR
OUT OUT
MONITOR
OUT
P
B
(DVD ONLY)
P
R
OUT
VIDEO VCR
OPTICAL
IN IN
DIGITAL AUDIO jacks
VIDEO jacks

Connecting a TV to an audio input

Enjoy TV sound with CinemaStation by connecting the
TV audio output jack to the AUDIO IN jack using a
commercially available audio cable. Press VIDEO on the
remote control to input TV sound.
IN