Remote Control - Yamaha DVR-S150 Bedienungsanleitung

Remote control

Problem
The remote control does not
work for operating the
CinemaStation
The remote control does not
work for operating other AV
equipment
Cause
The remote control may be operated
outside the remote control operation
range.
The remote control sensor on the
CinemaStation may be exposed to
direct sunlight or lighting (inverted
fluorescent lamps).
The remote control mode selection
may be improper.
The batteries may be worn out.
You may be trying to operate a
system component.
The remote control code may be
incorrect.
Troubleshooting
Solution
For information on the remote control
operation range, refer to the "Using the
Remote Control" (page 18).
Change the lighting or CinemaStation's
orientation.
Select the mode that suits your purpose.
(page 6)
Replace the batteries with new ones.
(page 18)
You cannot operate a system
component with the CinemaStation
remote control. Use the remote control
supplied with the product.
Set the correct remote control code.
(page 72) Depending on the model and
year of the product, the CinemaStation
remote control may not be able to
operate it partly or wholly. In this case,
use the remote control supplied with
each product.
83