Enjoying High-Quality Video (Ntsc/Progressive Scan) - Yamaha DVR-S150 Bedienungsanleitung

Enjoying High-Quality Video (NTSC/Progressive Scan)

Enjoying High-Quality Video (NTSC/Progressive Scan)
Progressive Scan is video that represent a frame with one pass of sequential scan lines whereas interlace output video,
which is usually adopted for most TVs, represents a frame with two passes. Progressive Scan provides better video
quality by reducing picture noises. To enjoy DVDs with Progressive Scan, you need to connect the CinemaStation to a
TV that has component video input jacks compatible with Progressive Scan. For details on connections, refer to "Other
connection methods" (page 12). Also, Progressive Scan is available only for NTSC signal output. You can set the video
signal system of your TV to "NTSC" with the On-Screen Menu (page 29).
PROGRESSIVE (MEMORY)
Notes
• If you play video with a 4:3 aspect ratio on a 16:9 wide television screen, Progressive Scan may fill the screen top to bottom. In this
case, change the screen aspect setting of your TV with the On-Screen Menu (page 29). If you cannot adjust the ratio, press
PROGRESSIVE (MEMORY) to turn off the Progressive Scan mode (use the interlace output mode).
• When the Progressive Scan mode is activated, a video signal will only output from the COMPONENT VIDEO jacks. Since the
COMPONENT VIDEO jack and Progressive Scan are available only for DVD playback, you cannot enjoy sources other than DVDs
with the Progressive Scan mode.
• CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH
THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 PROGRESSIVE
SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT YOU SWITCH THE CONNECTION TO THE "STANDARD
DEFINITION" OUTPUT. IF THERE ARE QUESTIONS REGARDING YOUR VIDEO MONITOR COMPATIBILITY WITH THIS
UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
This unit is compatible with the complete line of YAMAHA projectors (including the DPX-1, DPX-1000, DPX-1100, LPX-500 and
LPX-510), and YAMAHA plasma displays (including the PDM-1, PDM-4210 and PDM-4210E).
For U.K. and Europe models only
• When "Video Output" is set to an item other than "YUV", Progressive Scan is not available.
• When this unit is connected to a PAL monitor and you are playing back a PAL disc, if "TV system" is set to "AUTO" in the On-Screen
Menu (page 29), Progressive Scan is not available.
• When "TV system" is set to "NTSC" in the On-Screen Menu (page 29), Progressive Scan is available only with NTSC signals (PAL
signals are converted into NTSC signals).
46
To turn on the Progressive Scan mode
While disc playback is stopped, press and hold
PROGRESSIVE (MEMORY) on the CinemaStation
for 2 seconds or longer.
The Progressive Scan mode is activated and the
"PROGRESSIVE" indicator lights up in the
CinemaStation display.
To turn off the Progressive Scan mode
While disc playback is stopped, press and hold
PROGRESSIVE (MEMORY) on the CinemaStation
for 2 seconds or longer.
y
• When the Progressive Scan mode is off, the CinemaStation
provides video with interlace output mode.
• During playback, you cannot switch between the Progressive
Scan mode and the interlace output mode.
DVD-V