Configuring Dolby Pro Logic Ii Music Settings - Yamaha DVR-S150 Bedienungsanleitung

Configuring Dolby Pro Logic II Music Settings

You can configure the parameters for Dolby Pro Logic II Music to fine-tune the sound field effect.
STANDBY/ON
AUDIO
SURROUND SELECT
NIGHT
SW
SET MENU
TV INPUT
TV CH
A B C D E
PRESET
FREQ/RDS MODE
ON SCREEN
START
YPAO
CH
ENTER
STATUS
ON/OFF
TV VOL
MUTE
AMP
DVD/CD
VCR
TUNER
MOVIE MUSIC
CINEMA
POWER
TV
SUBTITLE
ANGLE
MATRIX 6.1 STEREO
REPEAT A-B
CENTER SURR
SHIFT
SLEEP
PRESET
PTY SEEK
START
MENU
CH
RETURN
TEST
VOLUME
VIDEO
SPORTS GAME
1
Carry out the "Enjoying 2ch sources with all
speakers (Dolby Pro Logic II)" procedure
(page 58) and select "PL II Music".
2
Press or to select "PANORAMA",
"DIM." or "CT WIDTH".
For details on each parameter, refer to "About the
Dolby Pro Logic II Music parameters" below.
3
Press or to configure the parameter.
4
To configure other parameters, repeat steps
2 and 3.
About the Dolby Pro Logic II Music
parameters
PANORAMA
Gives front L/R channel sound a wraparound effect,
distributed throughout the entire surround sound field, for
an expansive feeling.
Function: Expands the front sound field of Dolby Pro
Logic II.
Selection item: OFF/ON
Default setting: OFF
DIM. (Dimension)
Adjusts the difference in volume between front and
surround channels to the volume balance you desire.
Function: Adjusts the difference between front surround
sound field and surround volume.
Variable range: –3 (stronger toward the surround
direction) to +3 (stronger toward the front direction)
Default setting: STD (Standard)
CT WIDTH
Distributes the center channel sound to the left and right.
Function: Expands audio from the front sound field to
the left and right.
Variable range: 0 to 7
If set to 0 center channel sound will only output from the
center speaker. As the value rises center channel sound is
incrementally distributed to the L/R speakers. When set to
7, sound will only output from the L/R speakers.
Default setting: 3
67